USB Mains Adapter, 18W, 5V, 3A

SKU 750-00001 Categories , , ,

$5.95

61 in stock

Product Description

Overview:

This handy 100-240V input wall charger converts AC to a convenient 5V supply with up to 3.0A of current. Use it with the USB A to DC 2.1mm Jack Cable (#805-00019) to power your Propeller 2 development system.  Compatible with the P2 Edge Mini Breakout Board (#64019) and P2 Edge Module Breadboard (#64020).

The advantage of this combination is that it eliminates having to carry and store a larger wall plug power supply — use your computer’s USB port or the small 120V to USB 5V 3.0A wall pack.

Specifications:

  • 100-240 VAC input and 5 V 3.0 A output
  • CE & FC Certified
  • Fuse-protective system for over-current protection
  • Weight: 1.2 oz (34 g)

Additional Information

Weight 0.0942 lbs
Dimensions 1 × 1 × 1 in
Subscribe
Notify of
guest
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Roger W Louie

My 120V AC adapter came with two 5.0v outputs, one usb port labeled “QC3.0” and was colored orange, and another usb port labeled “2.4A” and was colored black. Naturally I assume I am supposed to use the “QC3.0” port, which I assume is 3.0 Amps output. But, I wonder if I used the
“2.4A” port. Would the P2 chip be “underpowered” at that point?

Ken Gracey

If you use the 2.4A port, the most current you’ll be able to use is 2.4A. But this is still much more than the P2 needs. If you start to connect servos, sensors and some higher-current devices to the JonnyMac board you could use the 2.4A. I’d just recommend using the 3.0A connection so you’ve got plenty of power.

Copyright © 2021 Parallax Inc. All Rights Reserved
Designed and Made in California, USA