Stepper 2 Click


11 in stock

Product Description

Stepper 2 click is a complete solution for driving bipolar stepper motors with full/half and micro-steps. It features the A4988 IC from Allegro Microsystems with DMOS low RDSON drivers on its outputs, which ensure high efficiency and reliable operation of the internal H-Bridges. This IC has the integrated translator section, used to simplify the control: using simple step control inputs from the host MCU, the stepper motor can be driven in both directions, with the predetermined step sizes. In addition, the output current is regulated allowing for noiseless operation of the stepper motor, with no resonance and ringing typically observed at unregulated stepper driver designs.

Additional features of the Stepper click include under-voltage, shoot-through, short circuit, overcurrent and thermal protection, so the Click board™ can operate reliably. With its input voltage range up to 35V, it can drive a wide range of stepper motors with up to 2A max. Due to simplicity of the step motor control, as well as the selection of various stepping modes offered by this Click board™, it is a perfect solution for building various applications that require precise and reliable stepper motor control, such as the movement control of beds, heads, and assemblies of various CNC plotting, milling and 3D printer designs.


  • Type: Stepper
  • On-board modules: A4988 from Allegro Microsystems, LLC.
  • Interface: GPIO
  • Compatibility: mikroBUS
  • Click board size: M (42.9 x 25.4 mm)
  • Input Voltage: 3.3V

For pinout diagram, schematic, and datasheet, see the manufacturer’s product page.

Additional Information

Weight 0.0434 lbs
Dimensions 1 × 1 × 1 in
Notify of
Inline Feedbacks
View all comments
Copyright © 2021 Parallax Inc. All Rights Reserved
Designed and Made in California, USA