Low-cost through-hole development board for the BASIC Stamp 1 (BS1-IC) and the 24-pin BASIC Stamp 2 series microcontrollers (BS2-IC, BS2E-IC, BS2SX-IC, BS2P24, BS2PE, and BS2PX24), and Javelin Stamp modules. This board is often used for experiments and permanent BASIC Stamp projects soldered to the through-hole area. A number of protective enclosures are also available to finalize your project.
Key Features:
- 14-pin SIP socket and 24-pin DIP socket supports BS1 and all 24-pin BASIC Stamp 2 microcontrollers
- 3-pin programming connection for BASIC Stamp 1 programing via BASIC Stamp 1 Serial Adapter (#27111)
- Serial DB9 connector for programming all BASIC Stamp 2 modules
- 9-volt battery clips and power jack provide flexible power supply options
- Monentary-push button for resetting BASIC Stamp
- Solder-hole area (1.5″ x 2.0″) arranged to easily support servos, 300 and 600 mil DIP ICs, DB9, DB25, RJ-11 connectors
- Reset Button
- PCB assembled, tested, and completed in Rocklin, California
- Program with the free BASIC Stamp Editor for Windows (*see below for Chrome & Chromebook)
About Chrome & Chromebook Support:
- 14-pin and 24-pin sockets
- Accessory socket
- Permanent circuit solder area
- Power jack and 9-volt battery power options
- Voltage requirements: 6 to 12 VDC
- Current requirements: depends on project area circuit
- Communication: Serial
- Dimensions: 4.00 x 3.00 x 0.65 in (102 x 76.2 x 16.5 mm)
- Operating temp range: -40 to +185 °F (-40 to +85 °C)
