eTape 0-5VDC Linear Resistance to Voltage Module

  • 29134: eTape 0-5VDC Linear Resistance to Voltage Module
  • 29134: eTape 0-5VDC Linear Resistance to Voltage Module
  • 29134: eTape 0-5VDC Linear Resistance to Voltage Module
$44.99
Product ID: 29134
In Stock: 5
1+$44.99
Downloads

Overview

This module converts the variable resistive output of eTape Liquid Level Sensors to an output voltage between ~0 and ~5 VDC.  The linear output voltage can then be applied to a microcontroller, ADC, or other voltage monitoring device, to accurately measure and monitor liquid levels.

Key Features:

  • Compatible with both eTape Standard and Chemical Liquid Level Sensors
  • 4-pin socket connects directly to an eTape sensor's 4-pin header
  • Trimmer potentiometer to calibrate for use with 8" to 32" eTape sensors
  • Includes 3-pin male/male header to optionally solder to the module's Power and Output Header

Note: eTape Liquid Level Sensor required, not included.

Details

  • Power requirements: 6 to 32 VDC
  • Output: Linear output voltage ~ 0.2–4.9 VDC, +/-5%
  • Dimensions: 0.85 x 0.75 x 0.17 in (21.6 x 19.1 x 4.3 mm)
  • Operating temperature range: -40 to +257 °F (-40  to +125 °C)

Downloads & Documentation

Product Specific Downloads
Download Details More Info
eTape 0-5V Linear Resistance to Voltage Output Module Datasheet - 381.78 KB | updated: 17 Oct 2014 - 7:44 pm
eTape Liquid Level Sensor Propeller C Code - 2.78 KB | updated: 17 Oct 2014 - 7:31 pm
eTape Liquid Level Sensor Propeller Spin Code - 54.02 KB | updated: 17 Oct 2014 - 7:29 pm
eTape Liquid Level Sensor Arduino Code - 2.05 KB | updated: 22 Oct 2014 - 12:44 pm
eTape Liquid Level Sensor BASIC Stamp 2 Code - 468.68 KB | updated: 17 Oct 2014 - 7:09 pm