Syntax: HIGH Pin
Make the specified pin an output and high.
* Note: expressions are not allowed as arguments on the BS1. The range of the Pin argument on the BS1 is 0–7.
|BS1 and all BS2 models|
The HIGH command sets the specified pin to 1 (a +5 volt level) and then sets its mode to output. For example:
...does exactly the same thing as:
PIN6 = 1 DIR6 = 1
OUT6 = 1 DIR6 = 1
Using the HIGH command is faster in this case.
BASIC Stamp Help Version 2.5.4
Copyright © Parallax Inc.