This through-hole friendly kit includes the Propeller microcontroller "plus" all the electronic components and connectors needed for a fully functional system on a breadboard or through-hole board.

 Also sold as part of the Propeller Education Kit. Prop Plug USB to serial converter (programming/communication tool) sold separately.

 Kit Contents:

• P8X32A Propeller Microcontroller - 40-pin DIP package Propeller microcontroller. Excellent for projects and product prototyping.
• 24LC256 EEPROM - 32 KB of non-volatile Propeller microcontroller program storage in an 8-pin DIP package.
• 5 MHz Crystal Oscillator - Accurate to +/- 30 PPM, and excellent for time sensitive applications. The Propeller chip's PLL can multiply this signal up to 80 MHz.
• LM2937 3.3 V Regulator - Provides a 3.3 V supply for the Propeller chip and its EEPROM, and optionally for other 3.3 V circuits in a project or design.
• LM2940 5 V Regulator - Provides an optional 5 V supply for peripheral 5 V circuits. Can also be daisy-chained with the LM2937-3.3 to regulate higher system input supply voltages and/or provide higher current outputs.
• Connectors - Includes 9 V battery clip wired to 0.1 inch spaced pins, a m/m programming header for use with the Prop Plug USB to Serial converter, and lots of jumper wires.
• Passive Components - Include filter capacitors for the voltage regulators, a pull-up resistor for the I2C EEPROM, and parts for an LED power indicator and pushbutton reset switch.

Downloads:
Setup and Testing Lab and Code (.zip)
Timing and I/O Basics Lab and Code (.zip)
Methods and Cogs v1.0 (.zip)
Objects Lab and Code v1.1 (.zip)
More Labs and Applications
Propeller Manual (.pdf)