BASIC Stamp 1 Carrier Board

  • 27110: BASIC Stamp 1 Carrier Board
$12.99
In Stock: 14
Product ID 27110
1+
$12.99

Overview

Through-hole carrier board for BASIC Stamp 1 (BS1-IC). This board provides a socket for inserting a BS1-IC, a solder area for permanent BASIC Stamp 1 projects, a 9-volt battery clip, a 3-pin programming header connection, and a reset button.

Key Features:

  • 14-pin SIP socket accepts a BS1-IC module
  • 3-pin programming connection connects to BASIC Stamp 1 Serial Adapter (#27111)
  • 9 V battery clip for portable power supply
  • Momentary-push button for resetting BS1-IC
  • Through-hole area provides solder points for permanent project circuits       
  • Supported by the BASIC Stamp Editor (Windows)

Details

  • 14-pin BS1-IC socket
  • 3-pin programming header
  • 9 V battery clip
  • Through hole solder area
  • Voltage requirements: 9 VDC
  • Current requirements: depends on project area circuit
  • Communication: Serial
  • Dimensions: 2.50 x 1.50 x 0.50 in (6.35 x 3.81 x 1.27 cm)
  • Operating temp range: -40 to +185 °F (-40 to +85 °C)

Note: A BASIC Stamp 1 is not included with this development board. BS1 programming requires the BASIC Stamp 1 Serial Adapter (#27111), sold separately, and the BASIC Stamp Editor for Windows.

Downloads & Documentation

Download Details More Info
BS1 Carrier Board Schematic - 68.21 KB | updated: 24 Sep 2012 - 11:43 am
BASIC Stamp Editor Software - 18.4 MB | updated: 02 Jul 2014 - 1:58 pm
BASIC Stamp 1 Application Notes - 516.2 KB | updated: 24 Sep 2012 - 12:09 pm
BASIC Stamp 1 is Back Article - 150.77 KB | updated: 24 Sep 2012 - 12:12 pm