Propeller Chip - 40-Pin DIP Chip Included!
The Propeller Professional Development Board is a high-quality, fully-integrated development platform for the Propeller P8X32A multicore microcontroller. A wide variety of peripheral connectors and typical I/O devices such as LEDs and buttons are built into the board, providing the developer with an ideal platform for rapid Propeller project development.
Key Features:
- On-board voltage regulators provide 5 V and 3.3 V supplies for your application circuits
- Contains the most common I/O interfaces for the Propeller chip on one board
- Large breadboard area gives plenty of room for additional components and devices
Key Specifications:
- 40-pin DIP socket for P8X32A-D40 Propeller microcontroller
- P8X32A-D40 microcontroller included
- 24LC256 32 KB EEPROM included
- 5 MHz crystal included
- 5V and 3.3V regulators on board
- Built-in USB programming/communication interface
- Six blue 16-segment LED displays
- Sixteen blue discrete LEDs
- L293D high-current driver for motors, solenoids, etc.
- Eight active-low pushbuttons with 3.3V pull-ups
- Eight active-low DIP switches with 3.3V pull-ups
- Two 10 k-ohm potentiometers
- Eight servo headers with selectable on-board/external power source
- DS1302 real-time clock with battery backup/charging capability
- MAX4411 headphone amplifier with 1/8" stereo audio jack
- MAX3232E RS-232 DCE interface
- RCA jack for broadcast TV or composite video
- Two PS/2 ports with 5V power and 3.3V pull-up resistors on clock/data lines
- 15-pin HD D-sub connector for VGA monitor
- Two ground terminals for logic analyzer/oscilloscope probe ground clips
- Voltage requirements: 7–12 VDC
- Current requirements: 59 mA quiescent current (@ 12 V)
- Communication: USB serial programming interface (FT232R)
- Dimensions: 9 x 5.25 x 0.75 in (23 x 13.5 x 2 cm)
- Operating temp range: 32 to 158°F (0 to 70°C)
Note: Requires a power supply and a USB A to Mini-B cable for programming. Recommended power supplies are #750-00007 (12V) or #750-00009 (7.5V). Recommended USB cable #805-00006.
Downloads & Resources:
Propeller Professional Development Board Product Guide (.pdf)
Propeller Professional Development Board Rev A Schematic (.pdf)
Acrylic enclosure box for this board from Mountain King (Off Site)