The OEM BASIC Stamp^® 2 module (kit form) is a through-hole version of the popular BASIC Stamp 2 module. Once assembled, this product is NOT eligible for returning to Parallax.

The kit includes the PBASIC interpreter, EEPROM, resonator, DB-9, and all the resistors and transistors needed to build a BASIC Stamp 2 module. Presented in a 20-pin SIP module format with standard 0.1"spacing. The PC board includes labeled component locations with visible traces between parts. PBASIC interpreter and EEPROM are socketed to allow for replacement.

This is a fully-functional BASIC Stamp microcontroller. It is programmed using our Windows Editor just like the BS2-IC module.

Please note that the lower power mode is only available when the regulator is removed and the BASIC Stamp module is powered on the vdd. The documentation includes a complete bill of materials with three sources and part numbers for each component. The BASIC Stamp Windows editor and BASIC Stamp manual may be downloaded separately if you don’t already have them. Measures 5.1 x 5.1 cm (2"x 2"). The Parallax warranty is voided if the OEM kit is not assembled and soldered as per the printed instructions included in the kit. Contact Technical Support if you have any questions relating to the assembly of this product.

Downloads:
BASIC Stamp 2 OEM Manual (.zip)
BASIC Stamp FAQ (.pdf)
OEM BS2 Schematic (.pdf)
BASIC Stamp OEM Gerber File Details (.zip)