The DS1620 is a complete digital thermometer on a chip, capable of replacing the normal combination of temperature sensor and analog-to-digital converter in most applications. It can measure temperature in units of 0.5° Centigrade (C) from -55° C to +125° C. (In Fahrenheit (°F), units of 0.9° F and a range of -67° F to +257° F.)
The DS1620 can also operate as a standalone thermostat. A temporary connection to a controller establishes the mode of operation and high/low-temperature set points. Thereafter, the chip independently controls three outputs: T (high), which goes active at temperatures above the high-temperature set point; T (low), active at temperatures below the set point; and T (com), which goes active at temperatures above the high set point, and stays active until the temperature drops below the low set point.
Features:
- Measures temperature within +/- 0.5°C error
- Converts temperature to digital word in 750 ms
- Interfaces with any Parallax microcontroller
Key Specifications:
- Power requirements: 2.7 to 5.5 VDC
- Communication: Three-Wire Serial Connection
- Dimensions: 0.24 x 0.35 in (0.62 x 0.9 cm)
- Operating temp range: -67 to +257 °F (-55 to +125 °C)
Downloads & Resources:
AppKit DS1620 Digital Thermometer (.pdf)
DS1620 DataSheet (.pdf)
StampWorks (.pdf)
DS1620 High Resolution Temperature Reading