Subtotal: 0
View Cart
 
Parallax Professional Development Board (Serial)
Parallax Professional Development Board
Item code 28138
Stock 1033
Price $159.99
Starting from: 5 pieces $151.99
Starting from: 10 pieces $143.99
Starting from: 20 pieces $127.99
Quantity 
Email to a Friend
 

Our Professional Development Board (PDB) is a high-quality, fully-integrated development platform for BASIC Stamp and SX28AC/DP microcontrollers. A wide variety of typical I/O (LEDs, LCD interface, buttons, etc.) devices and circuitry are built into the PDB, providing the developer with an ideal platform for rapid microcontroller project development.

Features:

  • 40-pin DIP socket (for all BASIC Stamp 24/40-pin and Javelin Stamp modules)
  • 14-pin SIP socket (for BS1-IC)
  • 28-pin “skinny” DIP socket (for SX28AC/DP)
  • 2.1 mm, center-positive connector for DC power
  • 16 discrete blue LEDs
  • Five blue 7-segment (with decimal point), common-cathode LED displays
  • Parallel LCD (available separately) may be configured in 4-bit or 8-bit mode
  • Two servo-compatible headers
  • Two 10KΩ potentiometers
  • Audio amplifier with built-in speaker; with switch for external speaker
  • L293D high-current driver for motors, solenoids, etc.
  • Eight, normally-open pushbuttons (I/O lines protected, and pulled-up to Vdd via 10KΩ)
  • Eight DIP switches (I/O lines protected, and pulled-up to Vdd via 10KΩ)
  • Pulse generator with selectable frequency (1 Hz, 10 Hz, 100 Hz, or 1 kHz)
  • RJ-11 connector; configurable for X-10 and 1-Wire® communications
  • RS-232 DCE port with MAX232E transceiver
  • DS1307 (I2C®) real-time-clock with 3v back-up battery (pre-installed)

Key Specifications:

  • Power Requirements: 6-12 VDC (1 A power supply recommended, 65 mA quiescent current)
  • Communication: RS-232 DB-9 female connector (#28031 required for USB connection, sold separately)
  • Dimensions: 9 x 5.25 x 1 in (227.5 x 132.5 x 25.4 mm)
  • Operating Temperature: +32 to +158 °F (0 to +70 °C)

Included In:

RoHS Compliant
Note: The Parallax USB to Serial Adapter, Serial Cable and power supply is not included with this product. Parallax recommends the 12V 1A power supply (#750-00007) for the Professional development Board to cover the widest range of potential uses.

Downloads & Resources:
Professional Development Board Documentation (.pdf)
Professional Development Board Schematic Rev D. (.pdf)
Power Supply Recommendation Chart

 

Related Products
12 Volt 1 Amp Power Supply
$9.99
BASIC Stamp 1 Serial Adapter
$4.99
Starting from: 5 pieces $4.74
Starting from: 10 pieces $4.49
Parallax USB to Serial (RS-232) Adapter with Cable
$19.99
Starting from: 5 pieces $18.99
Starting from: 10 pieces $17.99
Serial Cable
$3.99
Starting from: 5 pieces $3.59
Spin Stamp Microcontroller
$49.99
Starting from: 5 pieces $47.49
Starting from: 10 pieces $44.99
Starting from: 20 pieces $39.99
SX-Key (USB)
$49.99
The Stamp Collection
$199.99
Customers who bought this also bought
12 Volt 1 Amp Power Supply
$9.99
2N3906 PNP Transistor
$0.30
Starting from: 10 pieces $0.27
Starting from: 100 pieces $0.24
SX28AC/DP-G (Lead-Free)
$3.95
Starting from: 50 pieces $3.56
Starting from: 100 pieces $3.36
Starting from: 1000 pieces $3.16
3" jumper wires (1 bag of 10)
$1.99
Starting from: 10 pieces $1.79
Starting from: 100 pieces $1.59
Parallax (Futaba) Continuous Rotation Servo
$12.99
Starting from: 5 pieces $12.34
Starting from: 10 pieces $11.69
3 Pin Single Row Header (long)
$0.50
Starting from: 10 pieces $0.45
Starting from: 100 pieces $0.40
Home    |    Contact Us    |    Job Opportunities    |    About Parallax    |    Privacy Statement    |    Terms Of Use    |    Copyright 2008 by Parallax, Inc.