Parallax created this development tool in order to provide developers using five volt microcontroller (like our BASIC Stamp series) to have easy access to a PC’s USB port using the FTDI virtual device drivers. This tool is also a reference design for customer applications using the FTDI chip in-circuit. Download the documentation for the Bill of Materials, schematics and pictorial diagrams of the USB2SER Adapter.
Features:
- USB power, no external supply required
- Four-pin female SIP connector with 0.1" spacing to interface to the microcontroller circuit
- Red and blue LEDs to indicate TX and RX activity
- Supports standard and custom baud rates, 300 baud to 3 Mbaud
Key Specifications:
- Power requirements: 5 VDC, up to 90 mA, from USB connection
- Communication: Full speed USB, full duplex 5 V non-inverted TTL serial from 300 baud to 3 Mbaud
- Dimesnions: 1.25 x 0.47 x 0.29 in (31.8 x 12 x 7.4 mm)
- Operating Temperature: -40 to +185°F (-40 to +85°C)
Alternate viewing angle:
Click through for a close-up.
Note: This product requires a USB Mini-B cable (not included). We recommend our USB Mini-B cable (#805-00006).
Downloads & Resources:
USB2SER Rev A Documentation (.pdf)
USB2SER Rev B and C Documentation (.pdf)
FTDI Schematics (off site)