| |
 |
2008 Propeller Design Contest Winners
Winning projects were based on originality, professionalism, appropriateness of the Propeller in the design, and practicality/usefulness.
|
 |
Advances in Controlled Meteorological (CMET) Balloon Systems
Submitted by Paul Voss.
This application describes recent advances in the development of Controlled Meteorological (CMET) balloon that can remain aloft for days at a time and be commanded to continuously change its altitude during flight.
|
 |
AttoPilot
Submitted by Dean Goedde.
AttoPilot product turns any R/C airplane into an autonomous unmanned aerial vehicle.
|
 |
BrilIdea Prop Blade
Submitted by Timothy Swieter.
The Prop Blade is designed to be used for your LED lighting, animatronics or other theatrical project.
|
 |
Living Room LED Display
Submitted by Timothy Swieter.
Adding color and energy to the living room with a Propeller-controlled LED light display.
|
 |
Nickel-O-Matic Robot
Submitted by Mike Davey.
Uses inkjet technology to print a custom message on both sides of 1-1/2" diameter blank wooden nickels.
|
 |
RoboThespian™
Submitted by Will Jackson.
Imagine an interactive RoboThespian, the original robot actor to greet, entertain, and educate!
|
 |
Scare-odactyl
Submitted by Dave Matthews, KI4PSR.
A Propeller microcontroller controlled scarecrow that is built to resemble a pterodactyl.
|
 |
SPIN: Robotic Sailboat
Submitted by Christopher Miller.
Spin is a modified 2.4mR class single-person keel boat.
|
 |
Third Party Propeller Products
A list of Propeller tools and products developed by third-party manufacturers.
|